Current electricity MCQs for MDCAT

Current electricity is chapter 9 of 14 in the PMDC MDCAT Physics syllabus. Below are 3 sample MCQs with answers and explanations. The full bank has 63 questions on this chapter.

Sample questions

Q1Carbon fibres embedded in a concrete bridge carry a small current. Over time, the measured resistance of the fibre network increases. This suggests that:

  1. Athe bridge is becoming stronger
  2. Bthe temperature has dropped
  3. Cthe fibres have become better conductors
  4. Dthe concrete is cracking and the fibres are separating
Show the answer and explanation

Answer: D. the concrete is cracking and the fibres are separating

Carbon fibres embedded in the concrete slab form a conducting network. If its resistance stays steady over time, the bridge is keeping its structural strength. A rising resistance means the concrete is deteriorating or the fibres are being damaged, for example by cracks pulling them apart.

  • A is wrong: A stronger bridge would leave the fibre network intact, so its resistance would stay the same, not increase.
  • B is wrong: The rising resistance is used as a sign of damage to the structure, not as a measure of cooling.
  • C is wrong: If the fibres became better conductors, the network's resistance would fall, not rise.

Q2A charge of 90 C passes through a cross-section of a wire in 1 minute. The current is:

  1. A0.67 A
  2. B1.5 A
  3. C90 A
  4. D5400 A
Show the answer and explanation

Answer: B. 1.5 A

Electric current is the rate of flow of charge: I = Q/t, with time in seconds. One minute is 60 s, so I = 90 C ÷ 60 s = 1.5 A. One ampere means one coulomb of charge passing each second.

  • A is wrong: 0.67 is 60 ÷ 90, which divides the time by the charge. Current is charge divided by time.
  • C is wrong: 90 A treats the time as 1 s. One minute is 60 s.
  • D is wrong: 5400 multiplies the charge by the time. Current divides the charge by the time.

Q3A bulb lights almost at once when switched on, even though the drift velocity of electrons is very small. This is because:

  1. Aelectrons from the switch travel to the bulb at the speed of light
  2. Bthe bulb stores electrons, ready to release them
  3. Call the free electrons in the circuit start drifting at once, and the disturbance travels along the wire almost instantly
  4. Dthe drift velocity becomes very large at the moment of switching
Show the answer and explanation

Answer: C. all the free electrons in the circuit start drifting at once, and the disturbance travels along the wire almost instantly

A wire is already full of free electrons. When the switch is closed, an electric field is set up along the whole circuit almost at once, so all the free electrons start drifting together, including those inside the bulb. Each electron moves slowly, but the bulb lights almost immediately.

  • A is wrong: Individual electrons drift very slowly, around 10⁻⁴ m s⁻¹. They do not travel from the switch to the bulb at the speed of light.
  • B is wrong: A bulb does not store electrons. The electrons already in its filament start moving when the circuit is closed.
  • D is wrong: The drift velocity stays small at all times. The quick response comes from all the electrons moving together.

Topics in these questions: Applications, Electric current.

More Physics chapters