Electronics is chapter 13 of 14 in the PMDC MDCAT Physics syllabus. Below are 3 sample MCQs with answers and explanations. The full bank has 17 questions on this chapter.
Aconverting alternating current into direct current
Bconverting direct current into alternating current
Cincreasing the voltage of AC
Dstoring charge in a capacitor
Show the answer and explanation
Answer: A. converting alternating current into direct current
Rectification is the process of converting alternating current into direct current. It uses diodes, which conduct in only one direction, so current through the load flows one way only. The result is a unidirectional current that can be smoothed into steady DC.
B is wrong: Converting DC into AC is done by an inverter, the reverse of rectification.
C is wrong: Increasing the voltage of AC is the job of a step-up transformer.
D is wrong: Storing charge is what a capacitor does. It is not rectification.
Q2In a half-wave rectifier with one diode and a load resistor,
Acurrent flows through the load during both halves of the cycle
Bcurrent flows through the load only during one half of each input cycle
Cno current ever flows through the load
Dthe output is a smooth, steady DC
Show the answer and explanation
Answer: B. current flows through the load only during one half of each input cycle
In one half-cycle the diode is forward biased and conducts, so current flows through the load. In the other half-cycle it is reverse biased and blocks the current. The output is pulsating DC with a gap in every other half-cycle.
A is wrong: Current through the load in both halves of the cycle happens in full-wave rectification.
C is wrong: The diode does conduct during the half-cycle in which it is forward biased.
D is wrong: Without a smoothing capacitor, the output is a series of pulses, not a smooth, steady DC.
Q3In a full-wave bridge rectifier, how many diodes conduct during each half-cycle of the input?
AOne
BThree
CTwo
DFour
Show the answer and explanation
Answer: C. Two
A bridge rectifier has four diodes arranged in two pairs. In each half-cycle one pair is forward biased and conducts in series through the load, while the other pair is reverse biased and blocks. So two diodes conduct at a time, and the current through the load is always in the same direction.
A is wrong: Only one diode conducting is the case for a half-wave rectifier.
B is wrong: The diodes work in pairs, so three cannot conduct together.
D is wrong: Only one pair conducts at a time. The other pair is reverse biased and blocks.