Electromagnetic induction is chapter 11 of 14 in the PMDC MDCAT Physics syllabus. Below are 3 sample MCQs with answers and explanations. The full bank has 46 questions on this chapter.
Q1In a loudspeaker, ferrofluid held around the voice coil is used to:
Amake the coil a permanent magnet
Bincrease the electrical resistance of the coil
Cstore electrical energy
Dcool the coil and damp unwanted vibrations
Show the answer and explanation
Answer: D. cool the coil and damp unwanted vibrations
The voice coil of a loudspeaker heats up while it works. The speaker's magnetic field holds ferrofluid in place around the coil, where it absorbs and carries away heat. It also damps unwanted vibrations, which improves sound quality.
A is wrong: Ferrofluid particles are only temporarily magnetised, and the voice coil is an electromagnet driven by current, not a permanent magnet.
B is wrong: Raising the coil's resistance is not its purpose. Ferrofluid is used for cooling and damping.
C is wrong: Ferrofluid does not store electrical energy. That is the job of a capacitor or battery.
Q2Mutual induction is the production of an emf in one coil
Aby a changing current in a neighbouring coil
Bby a steady current in the same coil
Cby heating a neighbouring coil
Dby a constant magnetic field
Show the answer and explanation
Answer: A. by a changing current in a neighbouring coil
When the current in one coil (the primary) changes, the magnetic flux it produces changes. This changing flux links a neighbouring coil (the secondary) and induces an emf in it. This is mutual induction, the principle behind the transformer.
B is wrong: An emf from a changing current in the same coil is self-induction, and a steady current induces nothing.
C is wrong: Heating a neighbouring coil does not induce an emf. A changing magnetic flux is needed.
D is wrong: A constant magnetic field gives no change of flux, so it induces no emf.
Q3The current in a primary coil changes at 40 A s⁻¹. If the mutual inductance between the coils is 0.50 H, what emf is induced in the secondary?
A80 V
B20 V
C0.0125 V
D40 V
Show the answer and explanation
Answer: B. 20 V
The emf induced in the secondary coil is proportional to the rate of change of current in the primary: ε_s = M ΔI_p/Δt. Substituting: ε_s = 0.50 H × 40 A s⁻¹ = 20 V. A steady primary current would induce no emf at all.
A is wrong: 80 V comes from dividing 40 by 0.50 instead of multiplying by the mutual inductance.
C is wrong: 0.0125 V comes from dividing M by the rate of change of current, which inverts the formula.
D is wrong: 40 V uses the rate of change of current alone and leaves out the mutual inductance M.
Topics in these questions: Ferrofluids, Mutual induction.